1/4 Dia-HSS-Straight Shank/Left Hand Spiral Flute Hand Reamer Series/List #1602
| Cutting Diameter (DC) | 1/4″ | Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Decimal Equivalent | 0.25″ | Shank Size (SS) | 1/4″ |
| Length Chip Flute (LCF) | 2″ | Shank Type | Round w/ Drive Square |
| Flute Type | LH Spiral | Cutting Edge Material | HSS |
| Flute Count (NOF) | 6 | Coating | Bright |
| Cutting Direction (HAND) | Right Hand | Measurement Type | Inch |
| Overall Length (OAL) | 4″ | Series/List # | 1602 |
Product Features
| Remarks | <bold>Hand Reamers</bold>• <bold>Left Hand Helical† Flute</bold> pushes chips out ahead of the reamer in through holes and bridges interruptions in the hole being reamed.• Used for hand reaming for final sizing and finishing of holes.• Ground with a starting taper for easy entry into the hole.• Shankd are the same size the reamer size and are supplied with a square end for holding in a tap wrench or vise.• <bold>Diameter Tolerances</bold>• Up to 1/2 -- +.0002/-0• over 1/2 to 5/8 -- +.0003/-0• over 5/8 to 1-1/2 -- +.0001/+.0004 | Country of Origin | USA |
Shipping Info
Package Length
3.13000
Package Width
.38000
Package Height
.38000
Package Weight
0.06
Related Items
Item successfully added to your cart
Items successfully added to your cart
Added to
Go to My Lists
Select List
Change Quantity?
